Oriental and Persian Rug Wash Basics
To give your rugs the attention and care they need, you might want to consider rug wash. Rug wash is a service offered by several rug cleaning companies and some individuals who are trained to do this type of work. As opposed to other types of carpet cleaning, Rug washing involves more than just running the vacuum over the rug. There are quite a few necessary steps before you can genuinely say that the rug has been cleaned to its highest standard.
The first thing that needs to be done is to get rid of any stains on the rug. Stain removal is an essential part of rug cleaning because it ensures that it will look good for longer. You could find yourself spending a lot of time and money and possibly getting some nasty rashes from the cleaning solutions you use. If you have any spots or stains on your rug, you will need to take them off before you start working. Once they’re removed, you can begin cleaning up the rest of the piece.
Next, you will need to determine if your rugs have any dyes or coloring. Some of these things can leave marks on the rug when it comes time to wash it, so you’ll need to make sure that these aren’t there. There are plenty of products out there specifically made for cleaning up stains and other markings from rugs. It would be best if you also took note of the way that the rug is cut. Many people with fancy rugs will choose to have them professionally cleaned, but there are some things that you can do on your own to help clean them as well.
One of the biggest problems with rugs is that they tend to collect much dirt. To get this out of your rug, you will need to take a handheld vacuum and suck up all of the extra dirt that tends to get into the fibers. It’s important to remember to keep the cleaning appliance close to the area that needs cleaning, or you’ll risk it breaking down while you work. This could be an issue if you have an expensive piece that you want to save as soon as possible.
Once you’ve gotten everything out of the way, you should start the rug wash process. Start by pre-treating the area where the rug is located with a mild detergent. This will help make it easier for you to get all of the dirt and debris out of it without causing damage to the fibers. If you’re having trouble finding one specifically, try asking someone at your local Laundromat for advice. Most people have plenty of knowledge about washing rugs and can help you choose the best product to use on your own.
Once you’ve gotten all of the dirt removed from your rug, you will need to make sure that you get all of the wool out of it. This includes what’s usually considered the maintenance part of rug washing: getting the hair out of it! Use a lint-free brush to take out as much hair as possible while using gentle pressure not to damage the fibers. You should be able to remove the hair within a few hours altogether, depending on how dirty it is. Once the hair is out, make sure you follow the directions for your specific type of rug and leave it to dry in the sun before using it again.
31896 Plaza Dr #C5
San Juan Capistrano, CA 92675
Monday to Saturday: 8am to 6pm
Sunday: 10am to 4pm