Rug Cleaning Tips
Rug cleaning is done to remove dirt, stains, and fungi from rugs. There are many ways on how to clean rugs, depending on the type of rug or carpet. Most common methods include dry-cleaning, steam cleaning, and hot water extraction. But there are also chemicals that you can buy in a local store or in the Internet that will help you clean your rugs.
Dry cleaning is done by using a dry vacuum cleaner. Vacuuming should be done at least once every month. It is the best way to get rid of stains that are already set in, but it can remove dirt and mold that can still be present. Before you vacuum, make sure that your rug is completely dried up. This will avoid making your carpet stays wet even after you have vacuumed it thoroughly.
A very effective method that you can do by yourself is vacuuming, wiping, then mopping. Wiping is an effective way of removing stains, but it can only remove dust and soil. To use a vacuum with a good exhaust system that removes dust and soil deep in the fibers, then you need to attach a hose to it. This will allow the suction to reach deeper into the fibers. After doing this, you should allow the vacuum to run for about thirty minutes or so before cleaning any further.
Chemical cleaners are usually purchased in stores, but you can also purchase them online through rug cleaning companies. Most of these chemicals work by either neutralizing the dirt particles or by breaking down the chemical components of the dirt into simpler compounds that you can easily remove from the carpet. This makes the job of the shampooer much easier. Chemical shampoos are also used to get rid of dander and odors from clothes that have been worn in another room that is near the one where the stain is.
If you decide to hire an area rug cleaning company, you might as well ask them to use the best possible chemicals for your specific situation. Ask the companies that you are interviewing if they will do a free dry run to determine how much dirt will be removed from the carpet. This is necessary, because you want to know how much to expect to get out of the first pass. The company should also tell you if they will handle the chemicals on a case by case basis, or if they will use a large truck and have a dedicated area for chemical washing. Some companies may do both, but it depends on what the needs are for that particular cleaning. Chemicals can become extremely dangerous if used improperly, so it is important to know the pros and cons of each type of cleaning before making a final decision.
Vacuums that don’t work well for removing stains and dirt are likely to clog up as well, so you’ll need to do some research to find out which cleaners work better with certain types of rugs. You may have to spend a bit more money than you had planned on hiring professionals, but your rugs will thank you for it in the long run, as they will last longer and retain their resiliency. If you need to change your vacuums after a cleaning, make sure you know how they will react to the new materials. Most vacuum cleaners can be easily modified, so you shouldn’t have any problems adapting your cleaners to your specific needs.